Sorry for digging up an old thread but after a search I found this and it was very beneficial. I'm considering the upgrade to an ice tank and would want my flow to run from the pump to the intercooler, so I was wondering how you re routed the hoses to change the flow and did you use the...
I'd do a bolt in 6 point with removable door bars, that is what I plan on doing real soon. I would rather take my chances with a padded bar and harness vs. factory seat belts and crushed in roof.
I'm running a Gen 2 VMP TVS with a 85mm pulley on the stock engine, my car runs pretty good at the track but the 60' leaves a LOT of room for improvement. So far the best 60' is 1.59 and most of the time it's in the low to mid 1.6x range, I have BMR suspension and run ET Street Pro's.
I...
Myself with a LOT of help from a buddy recently installed a Gen 2 VMP TVS on my '14 and got it back from the tuner last Friday. I took it to the track the next day on some old Et Street radials and had some major traction issues. I ordered some ET Street Pro's and got them mounted this week...
Myself with a LOT of help from a buddy recently installed a Gen 2 VMP TVS on my '14 and got it back from the tuner last Friday. I took it to the track the next day on some old Et Street radials and had some major traction issues. I ordered some ET Street Pro's and got them mounted this week...
I took my '14 GT to NMRA in Bowling Green and ran True Street with the hopes of getting a 11 second slip. That didn't quite work out lol. The car is a base 14 auto with exhaust, tune, and was ran on a drag radial. There was no weight reduction other than removing the spare tire in order to haul...
I have a used BBK offroad x for sale that was used on my 2011 Shelby. I have some clamps but can't be certain that they're the correct ones as they were in a box full of other stuff. I will not ship and prefer local sale to 40456, or I can deliver to NMRA this weekend in Bowling Green. $150
I recently picked up a 2014 auto 5.0 (had it about a month) and thought I'd share the progress so far, it's slow going but I'm getting there lol.
The day I got it..
Swaybar relocation brackets installed and put the welds on..
Windows tinted..
Installed K springs, BMR panhard bar, and...
I recently purchased an auto 14 GT and have ordered a few parts and think I might add a converter as well, down the road. I recently read that something was changed on the stock converter if the car was produced past 4-14, which required the stock converter to be sent to CircleD. Anyone have...
I recently traded my stock blower & throttle body, intake, injectors, and some cash for a 2.9 whipple. I have decided to put it back to stock and trade for something else but I will need a few parts that I let go in the trade. There's one I know for sure I need and that is the tube from the...