Recent content by jjk23

Were you able to find a 3.0" upper? I have a Whipple 3.0" and 2.75" if you are still looking. Thanks.

I have a 2.3 Whipple that came off of my car two weeks ago. Are you still looking?

Besides being lean at idle, car is at target idle speed? It would be a good idea to check all of the vacuum lines on the back of the blower. I have had one occurrence where a line popped off. Car had a tough time settling in at idle and was lean. Remember, misfires are registered as a lean...

Cut that oil filter open and inspect for any material in the pleats. Good luck!

Brandon, The good news is that these cars are rather simple from a controls and operation standpoint. The downfall is that the diagnostics cannot always point us to which systems or parts need attention. Personally, I would try replacing the FRPS first. Worst case, you end up with a spare...

Christian, Just to clarify: Are you planning on installing a cold-air intake (CAI) or a ram-air intake (RAI)? Quite often, the CAI will add a few bends and change the length of the charge tube. This will affect how the air flows over the hot-wire used in your MAF-based control strategy. Your...

OP, You are doing the right thing by checking the easy things first. You mentioned observing zero fuel pressure using your OBD app + tablet. Did you check fuel pressure before and after key-up? [I assume your OBD app can read live data.] If you have not checked fuel pressure in both cases, I...

I bought this car a couple of months ago and just changed the spark plugs. I am unsure of how old these plugs are. They are the Motorcraft plugs. The new plugs are the NGK TR6ix gapped at 0.032". Some look alright, but some are raising concern. It is difficult to see in the pictures, but #7 and...

Hey guys, I picked up a Redfire Metallic Terminator about a month or so ago. I just thought I would check in and let people know I am excited about this recent purchase. This is an upgrade from a 2G DSM, so it is quite a change. Any quick tips if you guys are willing to provide will be greatly...