I have an 01 L w/a 4x4 pan. I wanted to just drain the fluid in the pan, how much (approx.) is needed to refill to the proper level? Keep in mind just the pan not the entire system. Thanks in Advance ;-)
Anybody in OC have a upper blower pulley remover tool that I could use to took off my pulley on my Lightning? My puller broke and bent the pulley at the same time so now I can't get the pulley off and I can't drive the truck otherwise I will throw a belt. I did remove the snout so if someone...
I have an 02 L with a 2lb upper and 6lb lower with a68.5 gatorback belt.
Im adding the new style metco idler w/100mm pulley along with the second idler pulley being 100mm as well.
What length belt should I use and should I go with gatorback or a different brand?
Thanks :rolling:
I have an 02 Lightning with a 6lb lower and 2lb upper. I bought both pullies from rpmoutlet when they were new to the market. I am looking at rpmoutlet GenII Aux idler pulley with a second idler on the factory bracket. Both pullies would be 100mm.
Link to Aux Idler Kit: Click
What size...
I installed a breather on both the driver and passenger side valve covers. I blocked off the intake tube and the tube that connects to the back of the intake maifold with vacuum caps.
Question is if I DONT run a breather on the oil filler neck, will i suck UNMETERD air and cause a lean...
I installed a breather on both the driver and passenger side valve covers. I blocked off the intake tube and the tube that connects to the back of the intake maifold with vacuum caps.
Question is if I DONT run a breather on the oil filler neck, will i suck UNMETERD air and cause a lean...
I installed a breather on both the driver and passenger side valve covers. I blocked off the intake tube, intake galley and rear of the plenum with vacuum caps.
Question is if I DONT run a breather on the oil filler neck, will i suck UNMETERD air and cause a lean condition? My chip is not...
I have a 99 cobra with a ati p600b s/c and an 03 cobra tank and pumps. after the pump/tank swap i got a engine light and pulled the code P455 which is a gross leak in evap emission control. I went to have it smoged b4 the light came on and it passed everything but the DRIVING CYCLE. The guy said...
I need a set of 4 tires in either of these sizes, 275/35/18 or 285/35/18. What is your best price including shipping? I dont care what brand they are. Thanks
Zip Code 92651
Will 18x10 Smoothie II's fit an 04 cobra if the backspacing of the rims are 7 1/8? Will it clear the IRS bolt? And is 6 1/8 backspacing for the front ok (the front wheels are 18X9)? Will the fronts stick out, in, look like hell? Thanks for the help
Boyd Coddington Smoothie II
Will 18x10 Smoothie II's fit an 04 cobra if the backspacing of the rims are 7 1/8? Will it clear the IRS bolt? And is 6 1/8 backspacing for the front ok (the front wheels are 18X9)? Will the fronts stick out, in, look like hell? Thanks for the help
Here is the peak numbers for my 02 Lightning w/the mods being K&N air filter and boost bypass:
1st Run: It Got fvcked up because the truck shifted out of gear.
2nd Run: Peak HP 378@5393rpm and Peak TQ 456.76@4148rpm.
3rd Run: Peak HP 370@4978rpm and Peak TQ 454.09@3837rpm.
I am...
I am going to get the Cobra Bilstein struts and shocks for sure. Now I have a chance to buy a brand new D&D front coil over kit with 250# springs. Will these springs work well with the Bilsteins? I need to know if the ride will be pleasent or unbearable? Please help out here!!:confused...