Pair of Bogart 15x11 rears, 7" BS, single beadlock, 5 x 4.5" bolt pattern. Centers have been powdercoated a very cool bronze burst color and rings are ink black - very sharp combo. Wheels are very light.
$850 for wheels only, or $1150 with MT 28x10.5 stiff wall slicks & screws. Slicks have...
I have a used IAC adapter (4-pin) and valve that is in very good shape. I used this on my mod motor setup but no longer need it. I used this on an Accufab 90mm tb and it works on many others. I believe I bought this from Precision or BS3.
$80 shipped
Please PM or email [email protected]
I have a modified 4.6 coolant crossover for sale. It has the passenger side outlet that goes to the radiator and has a -16 AN fitting welded on (for safety) - I believe this is the Mach 1 style crossover.
$60 + the ride
Please PM or email [email protected]
This is an old pic, and...
I have a black G-Force single layer jacket (XXL) and RJS single layer pants (XL) for sale. These are both in awesome shape and look just about brand new - 1/2 season of use.
I am 6'4" and about 250. The jacket fits great and the pants fit me when I was 36"-38" waist but should accommodate a...
9" rear - 35 spline spool, 4.11 gear, & pinion support
* Moser 35 spline spool
* Motive 9" street gear set - 4.11
* Moser aluminum Daytona pinion support
* 1350 yoke
$450 for all parts besides case, Moser case is not included for this price
Will also sell entire center section assembled...
9" rear - 35 spline spool, 4.11 gear, & pinion support
* Moser 35 spline spool
* Motive 9" street gear set - 4.11
* Moser aluminum Daytona pinion support
* 1350 yoke
$450 for all parts besides case, Moser case is not included for this price
Will also sell entire center section assembled and...
The crossover is mild steel, black ceramic coated with header wrap - 2.5" crossover & v-bands to T-6 flange - turbo mounts sideways with this piece and wastegate flanges are already welded on. Crossover is 28" wide at its widest point. Very nice welds, one year old.
$320 + shipping
Well up for sale are the remaining parts from my turbo kit - 4 large tubing pieces. The crossover is 2.5" crossover with a T-6 flange (fits many turbos, even some 76's) with 2 wastegate flanges welded on, coldside is all 3.5" aluminum designed for a front-center entry intake, and the downpipe is...
These came out of my motor when I hurt a piston on #4. So basically, this is a set of the 7 remaining pistons that are still in usable shape. Light scuffing of the coating is present on a few of the pistons, but this is fairly normal with any coated piston. These are .030 over Manley flat tops...
I'm going pushrod, so the rest of the 4v stuff has to go. This is a used ARP head stud kit for 4.6/5.4.
This kit goes for $300 new. Only issue is one missing stud that was stuck in the block that was hurt. You will need one replacement stud from ARP. Includes 19 studs, 20 nuts, 20 washers...
I have jumped the mod motor ship so this has to go. Very trick, custom aluminum oil pan for 4v motor. Holds almost 12 quarts of oil, I usually fill it with 11 qts. This added capacity gives you tons of headroom and no worries of running the pan dry at high RPM with high volume oil pumps like the...
* 03/04 Cobra valve covers - powdercoated black - $150 + ship
* Timing cover - powdercoated black - $100 + ship
Cleaning out the rest of the 4v stuff, must go. Please PM me if interested. Thanks.
I sold my TH400 trans but have this left over. Its a used JW flexplate for auto conversions of 4v motors with 8-bolt Cobra crank. JW part # N93002-468
$150 shipped
Changing platforms so my BS3 is up for sale. Everything was purchased brand new earlier this year from a licensed dealer. Part # BS3-004-006 for mod COP. Box has DAI (internal datalogging) & 3-step upgrades (perfect for turbo cars). Includes BS3, standard sensors (h20, IAT, boost), harness (is...