Recent content by fink46

Was wondering if others were running a limited slip differential at the drag strip with slicks? Was thinking of running a pair of hoosier qtp slicks next season at the strip but not wanting to burn up the posi clutches. Just wondering how others posi is holding up running slicks. Thanks for any...

Wanting to get others opinions on how you got past the tech inspection to run your convertible cobras down the strip? I have yet to take the cobra to the track and really wanting to here in the next couple weeks but I know its going to run faster than a 13.49 in the quarter mile, which is when...

Have had this cowl shake ever since I got the convertible cobra and I would really like to fix it. Its really bad at like 55-60 mph and its still there at higher speeds but not as bad. So far I have had all four tires balanced, new mm steering rack bushings installed and mm flsfc installed...

Hey guys need some input on only one wheel spinning coming out of the water box at the dragstrip. The car has the frpp carbon fiber limited slip differential. It only does it occasionally when coming out of the water box after doing a 4 second burnout. I run 315 nitto nto5r's on the back so...

Hey guys, I have been getting alot of wheel hop with my stock bilstein shocks. Was wondering who all has upgraded to something else and seen good results with wheel hop? I have other suspension upgrades and still getting wheel hop in 1-2 gears. Just curious about some shocks next to see if that...

I had the car out today and did some datalogging and noticed my fuel pressure duty cycle is maxed at 5000 rpm! I do have a AEM wideband UEGO gauge to monitor A/F ratio. My concern is that my A/F ratio is leaning to 12.2 at wot above 5000 rpm then come back to 11.8 to 11.9 by 6500 rpm. I'm...

Well I have this engine noise on cold start up that sounds like a rattle but maybe a tapping. To use something as an example it sounds just like my 02 gt when the throwout bearing would rattle but went away when you put the clutch in, only this noise stays untill car warms up for a couple of...

Hey, I have an 03 cobra with welded in flowmaster mufflers. Wondering if it would be benificial to go with a full catback exhaust system? I'm going to get the car dynoed soon so do you think I will see any hp increase on the dyno if I get the catback?

Hey guys, it was a nice weekend last week so I decided to take some pictures of the cobra. This is my first time (newbee) trying to host the photos so I don't know if it will work, but soon to find out. Well enjoy! http://img263.imageshack.us/img263/780/072g.jpg...

I have a 2003 cobra with motoblue 2.75 upper only pulley with jlt cai. The car didn't come with a hand held tuner. Called diablo sport to see if I could install their tune in the vehicle, he said I have to flash back to stock before installing their tune. I guess my question is will it be...

Hey guys I just purchased a 2003 cobra vert with 50,000 miles, it seems to be in good shape big difference in sotp over my 02 gt. Have a few concerns though when I looked at the pulley it says motoblue on it but no decimal diameter so I dont know what size the pulley is? I assume aftermarket I...