Recent content by dynamo

INSTALLED ANOTHER REBUILT CALIPER AND RECENTERED BRACKET TO ROTATER WITH A WASHER, HAD BIGGER AXLES INSTALLED 2 YEARS AGO AND THE CALIPER BRACKET WAS HITTING THE ROTATER. NEEDED TO BE CENTERED UP.

I did not bleed all 4 calipers this first time only the two rear. is it common practice to do all 4 when you change one caliper?

replace rear caliper last October because it was leaking. test drive car sometimes its ok, then sometimes rear rims gets smoking hot! any ideas? I use ebrake all the time. drilled vented rotators, ceramic brake pads could it be a bad after market part? not a ford part. casting that holds caliper...

I installed old p600b prochger on my car 2 years ago. Runs great! How do i know if i need a oil catch can? Were would i look for excess oil? In air filter?

Good day! my friend is looking for 03 style cobra rims in a matte black finish. does anybody know where i can find these for sale?

howdy, I have a p600b prochager with a custom steel welded inlet pipe. WITH A 3 CORE INTER COOLER. I Just purchase the procharger plastic inlet pipe for $20 bucks on line. The plastic inlet tube appears to be a little smaller then the one on car now. The procherger one will look alot nicer...

My next upgrade is a gear. just wondering if my gear is stock now? at 70 mph looks like 2600 rpm i have 295-45-17 tire size

Howdy, i have a p600b procharger now, just seen a p1sc head unit only for $500 used onlu 1,000 miles run time? Looks really nice does anybody know if this would mount up to my existing brackets? Also the correct rotation concerns me cw or ccw?

Howdy, just had car retuned and dyno. 380 rwp, 364 tq, 13.3 a/f raito, 7.73 lbs of boost. I installed smaller pully 3.2 to a 2.9 diameter, my boost gauge in car was showing 10 psi picked up another 30 hp to wheels with pulley change. pretty happy, long tube header next!

Just seen on ebay, thought someone might be interested. I did not know these kits were avaible when i supercharged my car. Its is a kennebell adapter kit that goes on top of the engine for 96-98 svt cobra. Kits has a buy now price of about $525, missing a few things, you would still need to...

Good day. I purchased set of M/T ET STREET RADIALS from discount tire in michigan. its a p295-45-17 on a 17x9 rim. what air pressure should i be runing on the street?

Car makes noise after about 20 minutes of driving. like a squeky,squill, seem like it only makes the noise when i slow down for a stop low mph, pretty loud too! when i push the brake on the noise goes away. so i put new rotaters and pads on the front, did not help! i think is coming from...

Are the flywheels balanced to the crankshafts? just installed new clucth on my car spec stage 2 had the flywheel resurfaced, it was pretty bad. everythng is feels good, and car runs great. but my dad asked me if marked the flywheel to the crank? i did not. this leads right into...

My back window glass is starting to seperate from the fabric. the fabric still in great shape, can anybody recommend a glue to bond the glass back to the fabric?

i have transmission back uop and ready to bolt up. i dont want to use the old botls, they are all border line bad. i found a set from American mucsle ford racing modular bell hosung kit, but it listed for the tremec bell hosuing. it sure looks like these will work, does anybody know if these...