DaveWertz's latest activity

  • DaveWertz
    DaveWertz replied to the thread FOR SALE: 98 Cobra.
    Sale pending
  • DaveWertz
    DaveWertz replied to the thread FOR SALE: 98 Cobra.
    Bump. 16500. Firm. New project awaits
  • DaveWertz
    DaveWertz posted the thread FOR SALE: 98 Cobra in SN95 Cobras.
    I have a nicely built and boosted Cobra. I have a full build list including specs on the forged shortblock. V1, intercooler, full...
    • 20230923_162945.jpg
    • 59174.jpeg
    • 31424.jpeg
    • 0127211618.jpg
  • DaveWertz
    DaveWertz posted the thread Intercoolers in SN95 Cobras.
    So I'm tossing the idea of finally swapping intercoolers. Yes I know I should have listened from the start but my budget was tight...
  • DaveWertz
    I was in the same boat a couple years ago. Wanted the KB but ended up with a Vortech. I first went non intercooled then realized that...
  • DaveWertz
    DaveWertz replied to the thread Hard Cold Starting.
    Neither of the 2. Motor is fresh with under 4k on build. Never have to add coolant nor do I loose any oil between changes Sent from my...
  • DaveWertz
    DaveWertz replied to the thread Hard Cold Starting.
    I could see that but did it before beggier injectors and fuel pump. Sent from my LM-Q620 using the svtperformance.com mobile app
  • DaveWertz
    DaveWertz posted the thread Hard Cold Starting in SN95 Cobras.
    So even before I went supercharged ive always had a problem with cold starts. I have to feather the throttle for about 2 or 3 min before...
  • DaveWertz
    I actually wanna know what benefits I am getting from it. As far as cold air after it enters the blower its heated up then cooled at the...
  • DaveWertz
    I was thinking just a turbo gaurd to be honest. Dont see the purpose of anything covering it. Sent from my LM-Q620 using the...
  • DaveWertz
    Im either going to put an air filter or turbo guard on the charger. Im just not seeing the benefit of the power pipe to be honest. I may...
  • DaveWertz
    So im going to run my setup without my power pipe and see how things go. Anyhow give me some options on what i can do about passenger...
    • 0718221835.jpeg
  • DaveWertz
    DaveWertz replied to the thread Vortech v-1 Si horsepower.
    I ahve very similar setup but just a V1 S trim. I made 452 at 5800rpm. That was 8.5lbs with a 3.12 pulley. My intercooler sucks...
  • DaveWertz
    DaveWertz replied to the thread Wideband issues AGAIN.
    If I pull the sensor directly out of the stream will it give me a false reading? I wouldnt be opposed to using a anti fouler but always...
  • DaveWertz
    DaveWertz replied to the thread Wideband issues AGAIN.
    I tried on the first one and it did nothing Sent from my LM-Q620 using the svtperformance.com mobile app

Top