Recent content by cobra fern

I am looking for two fuel pumps to install on my older style fore fuel hat . I have the gt pumps in it now but looking for something better that will fit inside this fore fuel hat . What are my options of fuel pump . It’s a returnless setup now also . Looking to upgrade to something better . I...

A normal bbk part number 17110 will do also . Thanks and have a good day

Hello guys . I’m looking for a twin bbk 65 mm throttle body . Prefer a ported one if not a stock one will do . Let me know what’s out there. Thanks

Got plug on . Managed to get it on without removing whipple . Was tight though . Took the vacumm fittings off the back of whipple and gave me more room .

New freeze plug ordered , be here Wednesday. Ordered a couple also . I'll also put red loctite on it when I install it . Gonna try to do it without removing blower . If it don't work I'll park it and do it next year . Colder weather coming soon . Thanks guys for the replies .

If you click on picture and zoom in you can see it beside the bolt but it's below the bolt though

It's below the bolt . See the circle .

Looks pretty tight with all the stuff behind blower but I think it could be done . Hard to get picture with hoses in the way . But I'll move them to make room though . Thinking of putting silicone on a socket to guide it down and tap the plug down into head . See how it works . Really not...

Car still runs normal and oil is good . Car has lean module and j&s vampire box . Just weird that plug popped off . Should I put one of those rubber freeze plug on or the stock ones . It looks like I can see it from behind the supercharger. Might be able to try it without removing whipple .

What would of caused it to pop off like a that.

Also I can see it on the top of head behind supercharger. Does the whipple have to come off to fix it . Thanks for any advice .

Was out for a ride and did a small pull and all of a sudden I smelled coolant and smoke was coming from under hood . Shut car off to see and the frost plug pooped off and was laying under the throttle body by the injector . It's the one on passenger side . What would of caused this . Thanks

Here it goes cobrabob . I have a whipple 2.3 gen 2 with a Reichard racing 3.4 supercharger pulley and (3) billetflow 100 mm and (1) billet flow 92 mm with the metco 4lb lower I was using the gates green hd belt part number k080820hd . Now by changing the lower to a 6lb I am now using a k080830...

Installed the pulley but haven't went and got belt yet . Will do that after work . Only change I did was 6lb lower and had to move the idler pulley on metco bracket to top hole . Let you know later cobrabob . Thanks