Well, since I can't seem to be able to edit my original post, I will let it remain to be laughed at and correct it here.
I am needing medium parchment interior pieces. The list in the original post is still what I need, and the picture shows the color. If anybody has anything, please let me...
Car is a 2001 convertible. i need the parts below in to match the color in the photo below.
rear interior quarter panels for a convertible (99-04 vert only)
driver’s side door panel with mach 460 option
bezel around radio and hvac controls
manual shifter bezel
center console
Sent...
Just finished up motor install. Car will start with starting fluid. Fuel pump is not coming on. Can somebody help me out in determining which pin is which on this fuel pump connector? Inertia switch is not tripped. I can hear ccrm working.
Sent from my SAMSUNG-SM-N910A using Tapatalk
The engine I bought for my 2001 has this MMR oil pan on it. I'm trying to stab the engine, but this oil pan is hitting and won't let the engine come down enough to mate with the trans. Anybody had this issue? Do I need to out the stock oil pan back on? Car is a vert if that matters.
Sent...
My door sticker is missing. Can somebody provide me with the color codes of this interior? Need to know about the colors on the door panel. It's a 2001 vert.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Will stock coyote headers work on our cars? I can get a set really cheap and they look like they would be a big improvement over the stock manifolds.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Kinda what I figured. Heads are already off, so I was wondering about removing them before installation. Thanks.
Sent from my SAMSUNG-SM-N910A using Tapatalk
when i am re-assembling my engine, and i go to install the heads and the timing chains, has anybody ever removed the cam followers so as not to risk damaging anything while turning the cams and crank to get them lined up properly? everything i have read says not to turn anything once the heads...
so, i am picking up a 2001 cobra next week. i'm excited as hell to be back in a mustang. only thing is it may need an engine, but i'm getting a hell of deal, so i am ok with that. question is, i have a low mileage 2v engine in my garage. can i put the short block from this engine in the...