Recent content by 86Fbody

  1. 86Fbody

    Looking at SVT Focus tonight, what should I be looking for

    I am looking at purchasing an 03 tonight with 70k miles on it, single owner that did all the maintenance so no records were provided to the dealership. What if anything should I look for on this car, are there any particular items that are prone to wear out or go bad prematurely? I plan to ask...
  2. 86Fbody

    IRS housing options

    I am in the process of doing an IRS swap into a Foxbody and am looking into options for IRS housings as the one coming with the IRS cradle has snapped mounting points. Has anyone had a similar issue and swapped to the cast iron T-Bird (or the like) housing or the newer 07-10 Explorer housing...
  3. 86Fbody

    FS: Team Dynamics 18x10 +45 w/ tires

    FS: Team Dynamics 18x10 +45 w/ tires - SOLD Team Dynamics 18x10 +45 offset w/ Toyo Proxes R888 295/30/18 tires with 70% tread left. Wheels have no dings, scratches, etc. Looking for 1300 obo shipped to the contiguous US or local pick up in MD. On car with P springs to show gap
  4. 86Fbody

    WTB: Fox Notch roller

    Looking for a rust free roller. Doesn't need a diff but pumpkin would be nice to allow it to roll. The more basic the better.
  5. 86Fbody

    Fs: Sct x4

    Selling SCT X4 unmarried with 5 unlocks left looking for 300 plus shipping.
  6. 86Fbody

    2012 Kona Boss FS

    #3144 VIN:1ZVBP8CU6C5276544 Located in Crofton, MD Can contact me via PM or [email protected] 55k miles on chassis 1600 miles on new motor K&N drop in filter Tiger racing hood with Aerocatch latches Brake ducts HP+ pads and new centric blank rotors Koni Yellows and P springs all...
  7. 86Fbody

    03 Cobra motor FS

    2003 Cobra engine w blower. $4000 Blower missing snout (broke off) Needs oil pan (original dented) Needs oil pick up and pick up tube Engine was installed in 1986 Mustang, which was in a roll over accident. Engine was tuned at JPC and made 450HP at the wheels. Comes with key, engine...
  8. 86Fbody

    SCCA track day at Summit Shanandoah

    Little late but I figured I would post this and see if anyone is planning to go to this event or are already attending. I saw a few mustangs were signed up in intermediate and novice.
  9. 86Fbody

    Braided brake line install Q

    I recently installed front and rear braided lines. I found Ford spec to be 41ft/lbs for the banjo bolts but that has to be wrong as one of the supplied banjo's snapped. I replaced it with the stock bolt for the time being. Two questions, what has anyone found to be the correct torque spec and...
  10. 86Fbody

    Going from Fox to Lotus Elise

    Has anyone driven an Elise that can give pointers, this particular one that we have going into track rotation is super charged. I am sure since the car is SC just like the last one that I tracked throttle out of corners will need to be watched, other than that this will be a whole new ball game...
  11. 86Fbody

    BMR Extreme (or whatever they are calling it) UCA or Cortex TA

    As the title states, which would you go with? Though the Cortex TA is close to twice the price money isn't exactly an object. I know a good TA is supposed to help plant the rear but have also heard of axle tramp under hard braking. Which would you go with?
  12. 86Fbody

    Pulling Motor

    Which bolt holes can be used to pull the motor?
  13. 86Fbody

    So this is what I did Sunday....

    I had what I would describe as a mechanical failure. The video pretty much shows what happened, http://youtu.be/l6yDNQMbUpM. My question now is what would you suggest as a replacement car. I am not sure the motor is good or if it is there is going to be some serious work that will need to be...
  14. 86Fbody

    03 Cobra dead alternator

    What are people using for alternators for a track car. This is the 3rd dead alternator, first was stock, 2nd eagle, 3rd a rebuild of the eagle, which might have just died.
  15. 86Fbody

    Blowfish beta shifter bracket

    I am selling the beta that was used for testing. It has roughly 5k miles on it, not that it matters since it is a no moving part. It is the same design as the current model being sold on CJPP except it isn't powder coated and I was not giving the MGW adapter plate to allow for the bracket to...

Top