Recent content by 802gt500

Solids are on and very direct feeling. Tightened up the rearend and no nvh. Good mod in my eyes. Sent from my SM-G892A using the svtperformance.com mobile app

I ordered a set of solid control arms. Guess I'll see how much noise they make and report back Sent from my SM-G892A using the svtperformance.com mobile app

All seems good and tight Sent from my SM-G892A using the svtperformance.com mobile app

Umi with solid at 1 end. Yes running drag radials. 11.8 wide "x 28.8 tall at 18 psi tire pressure. Hooks some of first and most always in second. Umi is giving me a second set of poly bushings but they said it is the last set the will give me. Might be a change the bushings at oil change...

I'm at 860 rwhp and on the street keep destroying polyurethane contol arm bushings. Using correct grease but they are cracking and getting loose. Last set lasted 4k. Currently solid bushings on rearend and polly on chassis. Thoughts on going solid both ends? I did this years ago on fox bodys...

My gen2r non ported heads ss cams 2.6 upper 10% lower made 19 on the hit and dropped to 16. I was expecting less boost with porting and larger pulley

Gen3r 93 built engine lt ported heads and intake 20 psi 2.8 10% lower jdm cams 863 rwhp and 773 tq

On the street with 555r and changing holes made big traction differences for me. Found 1 hole down from stock works well. The bottom hole i did not have enough traction to plant the tires

Key board warriors win this round. Wanna talk about my 8.3s na fox body? Im certainly scared of speed.

Gimmie11s. Haha try 9s kid

I knew this would happen. Any ways thats the conversion number the dyno guys gave me. It made 863 rwhp 773 rwtq. Go pick a fight with the dyno jet guys or dyno guys if you want nothing to me. I was extremely excited with the results. Fyi i did not make those numbers on the mustang dyno at pro...

Just got off the dyno on a cool day and the car made 1015 horsepower and 909 torque at the crank on 93 pump gas. Gen 3 R Fox Lake porting JDM SS cams tuned by Pro Edge tuning Bill Miller. Super happy

22k since poly bushings never a sweak or issue. Each to their own

Looking to borrow or rent an adjustable solid lash adjuster to degree cams in a 12 gt500 for this weekend. I will sanitize before I return it. Please email [email protected] Thank you

Looking to borrow or rent an adjustable solid lash adjuster to degree cams in a 12 gt500 for this weekend. I will sanitize before I return it. Please email [email protected] Thank you