Difference between Billetflow, Accufab, and LFP Throttle bodies?

A4BLK98SS

Member
Established Member
Joined
Aug 17, 2002
Messages
772
Location
Orange County, CA
I'm looking to pick up a single blade throttle body for a Kenne Bell at some point, and have a question about the different brands. I was talking to a good friend with a lot of knowledge of Terminators and he swears by Billetflow. I was talking to someone else though who said all three brands are basically identical just with different branding. Can anyone shed some light on this?

I searched and I am aware of the Accufab sticking problem, but in looking through the threads it looks like each of the single blades can stick?
 

PonyFever

'03 DSG vert 3816 of 5082
Established Member
Joined
May 8, 2005
Messages
3,180
Location
Las Vegas, Nv
I've had my Accufab 70mm t/b since the beginning of time, about 6+ years at least on the Cobra with no problem. It's hard to think there is really a lot of difference. BF is a solid brand as well with other quality products and the same with LFP. Maybe you start flipping quarters? Good luck and have fun.
 

whiplash306

Active Member
Established Member
Joined
Aug 23, 2005
Messages
1,886
Location
Gatesville, Texas
Does anybody know if BilletFlow is even making their TB's anymore? I sent Doug a message about 2 weeks ago and haven't heard back from him yet. But I do know that if they still make them, I'd like to own one as their work quality is TOP NOTCH!!!!
 

03 Indy Cobra

Well-Known Member
Established Member
Joined
May 30, 2005
Messages
2,734
Location
Indiana
whiplash306 If you can't get ahold of Doug try giving Lethal Performance a call they are a Billetflow dealer. I am sure Doug will get back to you he gets busy sometimes.
 

mblgjr

Pay Attention Boy!
Established Member
Joined
Dec 3, 2003
Messages
13,996
Location
Central Alabama
Billetflows were made in 2-main batches. An early run and a 'later' design.

I seriously doubt he'll make another round.

No major power difference in any of them.

The BF piece had a couple nicer touches than the Accufab.

Of what's currently available, get the Accufab. The KB is mfg. by Accufab.

Whoever told you all 3-are the same is highly misinformed.
 
Last edited:

spdtrip

Member
Established Member
Joined
Sep 29, 2009
Messages
175
Location
Ny
bf sbtb

I hope they still make the bf. I just bought and paid for one from lethal. Didnt say anything about being discontinued.
 

sassafras

New Member
Established Member
Joined
Mar 26, 2008
Messages
505
Location
Huntsville, AL
Does anybody know if BilletFlow is even making their TB's anymore? I sent Doug a message about 2 weeks ago and haven't heard back from him yet. But I do know that if they still make them, I'd like to own one as their work quality is TOP NOTCH!!!!

Doug still makes them but if you want to get in contact with him you have to physically call him.


I got my billetflow TB in on Monday and it is a very very nice piece of work.


Apparently I was told wrong by a sales rep at Lethal about them not carrying Billetflow, they do still carry Billetflow.
 
Last edited:

MileHighTurbo

Member
Established Member
Joined
Aug 20, 2009
Messages
85
Location
brighton co
I have had an accufab on my fox for over 10 yrs no problem!!

always a quality peice,also have a sb on my 04 term!

stay away from edelbrock even if a smoken deal, ive had two break on me!!
 

JymBart

New Member
Established Member
Joined
Mar 14, 2003
Messages
1,024
Location
East, TN.
Don't know much about Accufab, .. Billetflow is top notch. I wouldn't order the time of day from LFP.

JymBart
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
As far as I know the Billetflow throttle body isn't in production. Verify that with Doug at Billetflow.

I would recommend either the Dragon or Accufab throttle body/plenum. Both are available from Lethal Performance.
 

sassafras

New Member
Established Member
Joined
Mar 26, 2008
Messages
505
Location
Huntsville, AL
As far as I know the Billetflow throttle body isn't in production. Verify that with Doug at Billetflow.

I would recommend either the Dragon or Accufab throttle body/plenum. Both are available from Lethal Performance.

Like I said earlier, I literally bought one from him last week and got it on Monday.
 

A4BLK98SS

Member
Established Member
Joined
Aug 17, 2002
Messages
772
Location
Orange County, CA
As far as I know the Billetflow throttle body isn't in production. Verify that with Doug at Billetflow.

I would recommend either the Dragon or Accufab throttle body/plenum. Both are available from Lethal Performance.

The throttle body would be for a 2.2 KB. Does Dragon make a throttle body that would work?
 

Powershift03

Clapped out race car
Established Member
Joined
Oct 2, 2005
Messages
5,257
Location
Calif, central coast
I have a BilletFlow, and zero issues. I would think all the larger aftermarket single blade T-bodys perfrom about the same.

fvjjhv.jpg


1z164go.jpg


smbybl.jpg
 

ib_604

Member
Established Member
Joined
Jun 23, 2006
Messages
443
Location
Vancouver, BC
anyone have a preference on a plenum to match to the TB?

i like the dragon design because it looks cleaner...wonder if you could match up a billetflow TB to a dragon plenum?

a black finish would be nice!
 

whiplash306

Active Member
Established Member
Joined
Aug 23, 2005
Messages
1,886
Location
Gatesville, Texas
I have a BilletFlow, and zero issues. I would think all the larger aftermarket single blade T-bodys perfrom about the same.

fvjjhv.jpg


1z164go.jpg


smbybl.jpg
Such a nice piece!!! Did you just recently pick that up or have you had it for some time? I've called and left messages for Doug twice with no response.:shrug: I know he's a busy, busy guy, but dang!!! I really would like to pick up one of his TB's.....!
 

Users who are viewing this thread



Top