New Dyno Numbers....L/T Headers FTW!!!!!!!!!

2001asp

New Member
Established Member
Joined
Nov 7, 2007
Messages
944
Location
Pensacola, FL
Here you go. My car is tuned again. The new and old dyno graph on top of each other 4 U 2 C. I made a bunch down low and up top. Last dyno session I had the stock gear, this has the 4.10. I had the tune done with the knock sensor kept on. The outside air temp was in the low 30s. The tuner said if it were warmer it would have made a little more because the correction factor is so strong in the cold. Now for the bad, My poor o2 sensors are not liking the new set up and need to be replaced. But my fuel milage will go up after the new ones go in. :beer::beer::beer::beer: How old are all your o2 sensors?
dsc01178w.jpg
 
Last edited:

zPipes

Active Member
Established Member
Joined
Mar 8, 2007
Messages
2,694
Location
Florida
Mine are about 2 1/2 years old i think? or 1 1/2. I think the first though. Either way, one or both of them isnt working anymore because I have the beautiful check engine light on constantly, hoping to get a tuner this year and turn them off.
 

01SVTSnake

Thud Thud Thud Thud Thud
Established Member
Joined
Mar 11, 2007
Messages
6,226
Location
SE PA
im pretty sure 3/4 of mine are original. They're on list for all 4 to be replaced this spring
 

zPipes

Active Member
Established Member
Joined
Mar 8, 2007
Messages
2,694
Location
Florida
Oh, mine are in a set of o/r x. now that i think about it i dont know if i have 2 or 4. i think only two. the new pipes i got have a spot for 4 though. not happy
 

2001asp

New Member
Established Member
Joined
Nov 7, 2007
Messages
944
Location
Pensacola, FL
My rears are turned off. But the fronts are the ones that are not liking the Long tubes. They are the originals. Its time for a new fresh set. I hope for a little better gas milage.
 

dadro77

Deez nuts....
Established Member
Joined
Jul 16, 2006
Messages
831
Location
south fla
Nice!! I just put Kooks in mine, but with an o/r/x. Going for tune this weekend!!
 

006

Slow mustang :(
Established Member
Joined
Sep 18, 2002
Messages
3,949
Location
Los Angeles
Wow!

at 2900, you're over 300 and climbing..that is a shitload of torque!

For your mods, that is pretty damn sweet dude!
 

bsmith782

RANDY WATSON!
Established Member
Joined
Jan 14, 2008
Messages
1,243
Location
STL
nICE NUMBERS!

I have yet to see anyone that was getting a tune NOT need new o2"s just something you should prepare for when getting one it seems.
 

soccerman002

99 SVT Cobra
Established Member
Joined
May 28, 2009
Messages
4,767
Location
Virginia
Guy I work with sold his 2003 Mach 1 awhile back, and just recently brought me in two spare Bosch oxygen sensors that he never put in, brand new in box. Bosch part #'s 15716 and 15717. The plugs look the same, just a difference in the length of the wiring from the plug to the sensor.

I remember talking to you via PM awhile back about some exhaust parts, we're both local in Chesapeake. Lemme know if you would like these. I have no need for them, would let you have both for $70, or whichever you need for $35/ea.

Nice numbers by the way. I'll probably be getting a baseline done on my '99 @ DTP when the weather warms a bit.
 
Last edited:

zPipes

Active Member
Established Member
Joined
Mar 8, 2007
Messages
2,694
Location
Florida
with a tune cant you override the sensors and turn them off, and just put plugs in the holes?
 

na svt

say no to power adders
Established Member
Joined
Sep 30, 2005
Messages
11,248
Location
Beavercreek, Ohio
with a tune cant you override the sensors and turn them off, and just put plugs in the holes?
yes you can
A 70 ft lb improvement at 3000 rpm just with headers? Is that correct?

331RW with those Mods WTF??? That seems high to me, WOW!

Those numbers are very impressive for your mods.

It's the dyno. It's like a Mustang Dyno providing low numbers only opposite. On a dynojet the hp/tq would be more in line with cars with similar mods.
 

Users who are viewing this thread



Top