I'm selling my 2001 Saleen. I am the third owner of the car and I bought it about a year ago and found it had a coolant leak and ended up replacing the engine block, pistons, bearings, oil pump, and a few other parts. here is the shortened mod list. Motor was rebuilt by Mike Bell from Dayton Performance.
Engine
SHM ported/polished 4v heads
SHM ported/polished intake manifold
03/04 cams
crower valve springs and retainers
DSS forged pistons 9.5:1 compression
Manley forged rods
forged cobra crank
teksid block bored .020 over
vortech v-2 supercharger
vortech aftercooler
fluidyne radiator and heat exchanger
walbro 255lph fuel pump
42lbs injectors
Drivetrain
T-56 6speed
aluminum driveshaft
auburn pro diff
4:10 gears
31 spline moser axles
Suspension and brakes
14" rotors up front 13" rotors in rear
4 piston brembo calipers on all 4 wheels
bilstien coilovers
18x9 saleen light wheels front
18x10.5 saleen light wheels in the rear
nitto nt-01 tires 275/35 in front and 315/30 in the rear
all parts below are from maximum motorsports
k-member
a-arms
full length sub frame connectors
torque bar
panhard bar
lower control arms
front sway bar
I'm sure im forgetting a couple things. Feel free to ask me any questions. Im interested in trades for a comparable STi or evo. I dont need to sell the car I would just like to consolidate down to one car. With the current market I dont anticipate any buyers in my price range but I would like sell it for around 17k.
The car has Hoosier slicks on the front wheels in some pics but it has Nitto NT-01s now.
*Car does not run now* it just stopped running one day. motor has about 500 miles on it after rebuild. I work full time and I'm taking 18 credit hours and I just don't have the time or money to fix it.
Make an offer!
Engine
SHM ported/polished 4v heads
SHM ported/polished intake manifold
03/04 cams
crower valve springs and retainers
DSS forged pistons 9.5:1 compression
Manley forged rods
forged cobra crank
teksid block bored .020 over
vortech v-2 supercharger
vortech aftercooler
fluidyne radiator and heat exchanger
walbro 255lph fuel pump
42lbs injectors
Drivetrain
T-56 6speed
aluminum driveshaft
auburn pro diff
4:10 gears
31 spline moser axles
Suspension and brakes
14" rotors up front 13" rotors in rear
4 piston brembo calipers on all 4 wheels
bilstien coilovers
18x9 saleen light wheels front
18x10.5 saleen light wheels in the rear
nitto nt-01 tires 275/35 in front and 315/30 in the rear
all parts below are from maximum motorsports
k-member
a-arms
full length sub frame connectors
torque bar
panhard bar
lower control arms
front sway bar
I'm sure im forgetting a couple things. Feel free to ask me any questions. Im interested in trades for a comparable STi or evo. I dont need to sell the car I would just like to consolidate down to one car. With the current market I dont anticipate any buyers in my price range but I would like sell it for around 17k.
The car has Hoosier slicks on the front wheels in some pics but it has Nitto NT-01s now.
*Car does not run now* it just stopped running one day. motor has about 500 miles on it after rebuild. I work full time and I'm taking 18 credit hours and I just don't have the time or money to fix it.
Make an offer!
Last edited: