STIEGEMEIER BLOWER PORTING STAGES & PRICING -EXPLAINED

ridered494

New Member
Established Member
Joined
Jan 18, 2009
Messages
77
Location
Virginia
Ok so i just got the stage 5 on and went to the dyno. I am stoked about what it put out and did not figure I would hit 533 rwhp 509 tq. That was with a accufab tb, k&n intake with a little bit of modification, 2.7 upper, no lower, bbk longtubes and bassani x. It is pulling strong now and I couldn't ask for more with 500 bucks.
 

Nautilusvt

Converted
Established Member
Joined
May 28, 2008
Messages
199
Location
VT
WOW! ... service! (pics or BAN!) lol!

Stiegemeier1small.jpg


Stiegemeier7small.jpg


Stiegemeier10small.jpg


Stiegemeier12small.jpg


Stiegemeier8small.jpg
 

JayVee

REAL is Rare
Established Member
Joined
Nov 25, 2008
Messages
3,574
Location
Tampa,Fl.
Whats the BLOCK off plate welded to the int of the blower on the bottom??? What service is that??? But that looks absolutely AMAZING!!! That is exactly how I want mine! HAVE FUN!
 

BadBlue98GT

Active Member
Established Member
Joined
Mar 11, 2009
Messages
1,540
Location
North Georgia
Recently heard something about needing to put on a smaller pulley to spin the blower faster to offset the velocity lost by opening up the exit side (or something to that effect). Any truth to this? I'm looking at getting a port job, but not too interested in putting on a smaller pulley as I want to keep in spinning at "normal" rates.
 

JayVee

REAL is Rare
Established Member
Joined
Nov 25, 2008
Messages
3,574
Location
Tampa,Fl.
^ smaller pulley is GOOD for these Cobra's... Don't be skeerd! I have decided to go with the 2.76
 

Nautilusvt

Converted
Established Member
Joined
May 28, 2008
Messages
199
Location
VT
Recently heard something about needing to put on a smaller pulley to spin the blower faster to offset the velocity lost by opening up the exit side (or something to that effect). Any truth to this? I'm looking at getting a port job, but not too interested in putting on a smaller pulley as I want to keep in spinning at "normal" rates.

What pulley are you running now?
 

RRRR03Cobra

Anti-venom is Useless!
Established Member
Joined
Jun 8, 2004
Messages
1,471
Location
S.C.
Price?

I sent ya a p.m. asking if you were offering any specials on Whipple exterior polishing or Whipple porting? What is the turnaround time on both procedures? Thanks.:beer:

Rocky
 

colteerprecisr1

New Member
Established Member
Joined
Apr 19, 2009
Messages
8
Location
Mi
We are still running a sale here are the new prices:

03/04 COBRA PRICING
(LIMITED TIME)

Stage 1 blower tb and pl ported. $450.00
Stage 4 blower tb and pl ported. $695.00
(Prices above include pl ported/polished/welded and tb ported/polished for max gains.)
Stage 5+ blower and purchase of our Dragon tb and pl $1275.00
All Stage 5+ Includes TQ plate, welded and ported Accufab, Dragon tb and pl.

Dragon Sale:
$449.00 Port matched to any stage Stiegemeier ported supercharger .

Dragon tb ported/polished Pl ported/welded with purchase of Dragon $699.00 Welded plenum for increased area at supercharger inlet. Good for 15 RWHP over ported OEM , all welds are ground smooth. Surface is machined and interior is fully polished.

To upgrade the supercharger port, maintenance and port and weld OEM Tb and Pl $525.00.
Update blower only $275.00
Dragon tb ported/polished Pl ported/welded with purchase of Dragon $699.00 (if you do not have stage 5 must send in blower)
Throttle body and Plenum OEM (welded) $275.00 (12 rwhp)
Throttle body and Plenum OEM not welded $65.00 (2 rwhp)
Front drive Rebuilds $125.00 at the time of porting
BilletFlow pulley purchase and install $165.00 (All colors and sizes)
When sending in your pulley removal and install $45.00
Gaskets full set $74.50 or we sell individually.
Metco CAI $145.00
Injector service $85.00 (at time of porting)
Custom intake manifold porting $165.00 when sending in your blower.
Custom intake manifold porting $185.00 (when send it only)
Painting the blower $85.00
Painting the blower tb pl $145.00

Stage 4 Porting with Exterior Show Polish $995.00 Blower only
Stage 5 Porting with Exterior Show Polish $1095.00 Blower only

Stage 4 Combo (blower tb and pl) ported with Exterior Show Polish $1195.00
Stage 5 Combo with Exterior Show Polish $1295.00
Update port and Exterior show polish blower only $795.00
Exterior Show Polish Only $695.00 (blower only)
Exterior Show Polish Only $895.00 (Combo)

Blower only stage 1 $295.00
Blower only stage 4 $495.00
Blower only stage 5 $595.00

Money order discounts available.

Is the sale still going on?? I am interested in a stage 4 or 5 port on an 03 vert.

Thanks

Bill
 

dynobobstieg

New Member
Joined
Aug 26, 2004
Messages
4,153
Location
st. charles mo
STIEGEMEIER ported Eaton warranty advisement.​


You will first need to obtain written permission if you are considering alterations to you Stiegemeier ported or rebuilt Supercharger by another company or yourself. Without this consent any and all warranty work, updates, discounts along with give away's or contest eligibility WILL BE VOIDED.

For those of you seeking more from a previously ported Stiegemeier blower, we do offer a max race set up. These case are welded extensively , it will add a couple days to turnaround time and you must call with complete mod details and name of company or person that is going to tune your project.

Our 100 RWHP Stiegemeier Stage 6 Ported Supercharger that was independently tested at Shelby Fest 2009 and to be offered for the first year to all GT 500 owners.
This Stage 6 is in final patent stage. I do apologize for the delay in new product updates, but due to imitations and propaganda we must and will legally protect all new advancements.

Thanks
Stiegemeier
StiegeSplash
636-949-0075
 
Last edited by a moderator:

03SSnake

Slithering since 2004!
Established Member
Joined
Sep 25, 2008
Messages
25
Location
AZ
STIEGEMEIER ported Eaton warranty advisement.​

Our 100 RWHP Stiegemeier Stage 6 Ported Supercharger that was independently tested at Shelby Fest 2009 and to be offered for the first year to all GT 500 owners.
This Stage 6 is in final patent stage. I do apologize for the delay in new product updates, but due to imitations and propaganda we must and will legally protect all new advancements.

Thanks
Stiegemeier
StiegeSplash
636-949-0075

Will this Stage 6 port be available to us 03-04 owners as well? If so, ETA?
 

dynobobstieg

New Member
Joined
Aug 26, 2004
Messages
4,153
Location
st. charles mo
We have the patent for these and Bob is doing more testing on our 03 Cobra and our 08 Shelby GT 500 today. I will post this information for all of you soon. We already did the indepentant test on a Shelby GT 500 with awesome results.
Thanks
Robyn Stiegemeier
(I am out of town and from what I hear we have been very busy at the shop so if you do not get an answer on the forum please call the office. The internet connection here is terrible.) I will be back in the office on the 16th.
Thanks again
636-949-2275
[email protected]
StiegeSplash
 

Users who are viewing this thread



Top