My weekend

[predator]

Yes....that is a full 3" setup I put together with misc parts from a Stainless Works kit and Kooks. I have 1 3/4" stainless LTs to go with the rest of the setup. The mufflers are from Stainless Works also. They are not the flow through......I figured a need a little bit of back pressure! :thumbsup: I still need to get the final welds done on all the connections. As you can see it is only tacked right now.

The whole setup is for OT/RR track. Therefore the reason for the full MM front/rear coilover setup, Baer brakes and Toyo RA1 tires.

 

[Mrcobraguy]

Damn you all suck i need some money so i can make my car stupidly fast. O well for now its to build the solid rear and get a beater car after that who knows. Your car should be sick when its all done.

 

[predator]

Thanks! :beer: Remember, no matter what level you are at these cars are amazing!

 

[DR. WU 2000]

Did I see 4.10's :uh oh: I don't think I could be fast enough on the stick
with those gears. Good luck with that monster. :thumbsup:

 

[predator]

Did I see 4.10's :uh oh: I don't think I could be fast enough on the stick
with those gears. Good luck with that monster. :thumbsup:

Short track/autocross.........I will be setting up the factory rear when I pull it for longer OT/RR with the 3.55s. :thumbsup:

 

[predator]

Just thought I would continue this thread instead of starting another. :thumbsup: This past weekend I only had Sunday to get anything done. My job got in the way Sat......go figure on such a nice day!

Anyway, got the trans pulled on the car and pulled the reworked Liberty trans I just received Friday from the box. I have a few pics of the two transmissions side by side so you guys can see the differences.....and one pic of the new yolk for the driveshaft......if someone can host for me.

The new trans has the 26 spline input, 31 spline output, new syncs, new 5-6 gear to make it more RR/OT useful, new shift fork pads and new billet keys for each of the gear clusters. I will be using a MGW shifter on top. Power from the engine will be via a Mcleod twin disk, aluminum flywheel, etc......

Should be fun! :rockon:

 

[IronTerp]

Sounds awesome Dave.....When is you "designated time of arrival" for this monster???

 

[predator]

Still working to get it all done this month, but the motor still needs to be pulled for the new CPs and heads. I am hoping to have more time to work on it in the next few weekends.

 

[Blk03SVTCobra]

A little bit of an update on Dave's car....

I'll let him do the explaining again :beer:

Lookin good, Dave :rockon: