What did you do for your Terminator today?

Stage 4.6

Well-Known Member
Established Member
Joined
Dec 31, 2010
Messages
2,074
Location
Colorado
@Stage 4.6, that's going on your '04 Cobra? If so, you're not happy with your KB 2.6? Just curious.

Numbers wise, what are you now hoping for?

Picked her with the new Gen 4 Crusher;
Bob, as mentioned previously I was very happy with the numbers the KB2.6 put down (720ish/690ish).
I was expecting an improvement, and had my expectation's but this blower exceeded them. I was shooting for 740-750, this thing cranked out 730 on the first pull, After working through some issues; 779hp/757Tq. I really didnt want to push any harder since this motor is stock , with no head stud upgrades. Tried posting dyno vid but file is to big.
20210421_095510 (Medium).jpg
 

03 Indy Cobra

Well-Known Member
Established Member
Joined
May 30, 2005
Messages
2,734
Location
Indiana
Picked her with the new Gen 4 Crusher;
Bob, as mentioned previously I was very happy with the numbers the KB2.6 put down (720ish/690ish).
I was expecting an improvement, and had my expectation's but this blower exceeded them. I was shooting for 740-750, this thing cranked out 730 on the first pull, After working through some issues; 779hp/757Tq. I really didnt want to push any harder since this motor is stock , with no head stud upgrades. Tried posting dyno vid but file is to big.
View attachment 1700433
Congrats on the new blower and the horsepower gain Will.
 

geoffmt

Well-Known Member
Established Member
Premium Member
Joined
Jul 30, 2015
Messages
2,024
Location
billings, mt
thank you, yessir downtown La Mesa San Diego, its very old fashion filled with good people.

I grew up there, haven’t been back is a LONG time. Dad used to take his old 66 Paxton gt350 down there and the titanium gray superformance cobra when he had them. I got rather pissed last Halloween when the fascist pussies burned it all


Sent from my iPhone using the svtperformance.com mobile app
 

AFLOCOBRA

#2168
Established Member
Joined
May 10, 2020
Messages
337
Location
San Diego
I grew up there, haven’t been back is a LONG time. Dad used to take his old 66 Paxton gt350 down there and the titanium gray superformance cobra when he had them. I got rather pissed last Halloween when the fascist pussies burned it all


Sent from my iPhone using the svtperformance.com mobile app

wow a 66 gt350 that is money! Yessir same here i was pissed damn terrible what they did to the small good town. Wanted to burn those ****ers...
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
Picked her with the new Gen 4 Crusher;
Bob, as mentioned previously I was very happy with the numbers the KB2.6 put down (720ish/690ish).
I was expecting an improvement, and had my expectation's but this blower exceeded them. I was shooting for 740-750, this thing cranked out 730 on the first pull, After working through some issues; 779hp/757Tq. I really didnt want to push any harder since this motor is stock , with no head stud upgrades. Tried posting dyno vid but file is to big.
View attachment 1700433
Nice, safe numbers for your motor. Must be a blast to drive. Enjoy it this summer, Will.
 

geoffmt

Well-Known Member
Established Member
Premium Member
Joined
Jul 30, 2015
Messages
2,024
Location
billings, mt
wow a 66 gt350 that is money! Yessir same here i was pissed damn terrible what they did to the small good town. Wanted to burn those ****ers...

I grew up a couple blocks from the fire dept off the 125, down the street from Drew Ford(where I saw my first Saleen in maybe 84-85?)
Heard from old high school friends that the fascists were bussed in for the destruction. I say hang them all including the organizers.


Sent from my iPhone using the svtperformance.com mobile app
 

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,577
Location
Wesley Chapel, FL
Picked her with the new Gen 4 Crusher;
Bob, as mentioned previously I was very happy with the numbers the KB2.6 put down (720ish/690ish).
I was expecting an improvement, and had my expectation's but this blower exceeded them. I was shooting for 740-750, this thing cranked out 730 on the first pull, After working through some issues; 779hp/757Tq. I really didnt want to push any harder since this motor is stock , with no head stud upgrades. Tried posting dyno vid but file is to big.
View attachment 1700433
Great numbers..

These cars still blow my mind... Damn near 800 RWHP on a stock long block. Even with the rising prices, the bang for buck is amazing.
 

Stage 4.6

Well-Known Member
Established Member
Joined
Dec 31, 2010
Messages
2,074
Location
Colorado
Thanks Nate!
I was surprised despite all the reading I've done on here, it definitely surprised me. I was thinking about doing head-studs and camming it, but I'm just going to enjoy it for a while, possibly built the tranny, since its always been so damn notchy.
 

CJHAMIL

Pew Professional
Established Member
Joined
Jan 22, 2012
Messages
641
Location
Las Vegas, NV
Got the Bronze SVE Series 2 wheels on. Wanted to try the color out before I order a custom set of wheels. The car and wheels are coated in Gtechniq C1, two layers of Gtechniq EXO and P&S Beadmaker. Makes the colors pop more along with the protection provided by the coatings. Washing the car takes less than an hour start to finish.
178179283_3974835729275810_4301075951059515697_n.jpg
 

01yellercobra

AKA slo984now
Established Member
Joined
Oct 5, 2005
Messages
21,125
Location
Cali
Drove mine to Palm Springs on Friday to visit my mom. On the way up IAT's went through the roof. Saturday morning I found the intercooler tank was empty. Long story short we road tripped her new car back to my place so I could grab my truck and trailer. Pulled the blower today and found the culprit.
f2e28fa84be14cb13cf1b3895a3cc202.jpg
4c88958f349678701f01892c45639224.jpg
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
Got the Bronze SVE Series 2 wheels on. Wanted to try the color out before I order a custom set of wheels. The car and wheels are coated in Gtechniq C1, two layers of Gtechniq EXO and P&S Beadmaker. Makes the colors pop more along with the protection provided by the coatings. Washing the car takes less than an hour start to finish. View attachment 1700610
The bronze highlights add a nice contrast to the blue paint. Looks good!

I added a set of 10th anniversary wheels. The rear wheels were widened and now sit in 315’s
View attachment 1700641
I've always liked the 10th Anniversary wheels. The wider rears look really nice.
 

TerminatoRS

Well-Known Member
Established Member
Premium Member
Party Liquor Posse
Joined
Jul 29, 2019
Messages
2,376
Location
Wisconsin
^Looks like it should be rear tire time too! lol
Did you put that sticker on there?
 

Users who are viewing this thread



Top