Impressive. I gained 8 rwhp with a tvs blower on pump gas and 17 lbs of boost...
Sent from my Moto E (4) Plus using Tapatalk
What did you do for your Terminator today?
- Thread starter mrose75
- Start date
Sent from my Moto E (4) Plus using Tapatalk
I had my welder buddy replace the 3/8" remote IAC hose barb on my intake and put on a 5/8" AN flare. Then I did the same on the remote IAC valve itself, completely cured my hot idle stalling issue and rpm drops between shifts! Next is to pulley down the F-1A and see what 23+ psi feels like. Currently makes about 900 with 18 lbs.
Last edited:
Slapped a few more items on last night. All thats left is finishing up the catch can, burping the coolant system and grabbing a few misc bolts then she'll be ready to fire up.
So damn close!!
So damn close!!
Cooling system flush, brake flush, new plugs, fuel filter, new battery, coolant expansion tank cap, new intercooler res cap, and oil change. And renew tabs from 2017.
Oh, still need to get new tires. The BFG-KDW2 are now really old.
Oh, still need to get new tires. The BFG-KDW2 are now really old.
Got my AEM gauge and put some tail lights on my daughters V6.
View attachment 1650766
Sent from my iPhone using the svtperformance.com mobile app
View attachment 1650766
Sent from my iPhone using the svtperformance.com mobile app
Attachments
Last edited:
Where did you get the SVT face plate for the AEM gauges?
Sent from my SM-G950F using the svtperformance.com mobile app
Speedhut sells the setup, atleast that's where mine came from and that's the same package he showed.
The link Jay sent is what I used for the AEM. I Have three speedhut gauges and they are sweet looking. I wasn’t sure how to hook up their AFR gauge so I just went with the AEM and the overlay from Stick it Design.
Sent from my iPhone using the svtperformance.com mobile app
Where did you end up hiding your catch can?
Little cleanup today!!
Kim's Cobra looks great, Tim.
Well I feel like i'm finaly making head way. Started couple of mouths ago with a tear down to bare block. Clean and inspect. Put a nice cross hatch hone job, file fit rings for more boost. Pick up a nice set of DB heads, machine the surface for a clean bite for the head gasket, complete valve job. and assmebled it all togehter today...
It only took me 5 hours to successfully install a J2Fab ALT and Big3 kit by myself. 
I am no mechanic and didn’t think I could do it. Stock one last me 69k miles.
Sent from my iPhone using svtperformance.com
I am no mechanic and didn’t think I could do it. Stock one last me 69k miles. Sent from my iPhone using svtperformance.com
Well I feel like i'm finaly making head way. Started couple of mouths ago with a tear down to bare block. Clean and inspect. Put a nice cross hatch hone job, file fit rings for more boost. Pick up a nice set of DB heads, machine the surface for a clean bite for the head gasket, complete valve job. and assmebled it all togehter today...
View attachment 1651298
View attachment 1651299
View attachment 1651300
View attachment 1651301
That black and blue looks good.
Sent from my iPhone using the svtperformance.com mobile app
It only took me 5 hours to successfully install a J2Fab ALT and Big3 kit by myself.
Sent from my iPhone using svtperformance.com
I’ll get around to this myself one day.
Sent from my iPhone using the svtperformance.com mobile app
Well I feel like i'm finally making head way. Started couple of mouths ago with a tear down to bare block. Clean and inspect. Put a nice cross hatch hone job, file fit rings for more boost. Pick up a nice set of DB heads, machine the surface for a clean bite for the head gasket, complete valve job. and assembled it all together today...
View attachment 1651298
View attachment 1651299
View attachment 1651300
View attachment 1651301
Nice work! You did all of the machining yourself?
Users who are viewing this thread
