Procharger and crossover delete

01slobruh

Member
Established Member
Joined
Nov 24, 2018
Messages
73
Location
Oahu
Does anyone with a Centri blower and crossover delete have pics of how they routed their coolant hoses? I have a on3 delete and am starting the process of going return. I have a p1sc for now, and am having one hell of a time trying to figure out the coolant hose routing without it being an eyesore, and while clearing my aero rails., especially on the passenger side. The blower pulley is in a tough spot. Anyone have any pics of their setups or suggestions. Thanks


(The rubber hose was just temporary as I had to move the car into the garage and am waiting on some an fittings)
IMG_01102019_014306_(1080_x_1080_pixel).jpg
IMG_01102019_014502_(1080_x_1080_pixel).jpg
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
16,021
Location
Central Fl
Mine is hidden under the shaker on my Mach but basically the pass side I came up over the alternator and ran it along the hose from the driver side. I have the on3 housing attached to the fan shroud. the main hose goes from the housing under the inlet to the blower to the radiator
 

01slobruh

Member
Established Member
Joined
Nov 24, 2018
Messages
73
Location
Oahu
Mine is hidden under the shaker on my Mach but basically the pass side I came up over the alternator and ran it along the hose from the driver side. I have the on3 housing attached to the fan shroud. the main hose goes from the housing under the inlet to the blower to the radiator

Do you have any pics of your setup? Or do you know what an fittings you used? Stock or aftermarket rails? I might be over thinking this, but the passenger side looks like it won't clear the aero rails unless I get creative with the fittings and routing.
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
16,021
Location
Central Fl
I thought I had them on my IG but I dont, I'll see what I can find and post em later. I think I may have used a straight hose end on the pass side to get up and over everything
 

DSG2003Mach1

Well-Known Member
Established Member
Premium Member
Joined
Apr 15, 2004
Messages
16,021
Location
Central Fl
It turns out there is a spacer I could have used, if I had know I would have gone over the alternator instead of in front, too lazy to re do it for that. I believe I do have a zip tie holding the line up for extra support.

05928004ffc1fa3af048830d3740d3a3.jpg


One picture at a time bullshit... pm me a number or IG handle or something and I’ll send more


Sent from my iPhone using Tapatalk
 

Users who are viewing this thread



Top