Add me as well
"Official" VMP TVS owner thread
- Thread starter bad93svt
- Start date
Just wrapped up install on mine. Numbers to come.
3.1/2#
3.1/2#
I just finished the install on my wife's Cobra Vert so the list is growing. This one is a 93 pump gas car. 3.0 upper/factory lower, Ported BBK twin 65mm TB, bassani headers and cated X, SLP LM1 exhaust, 60lbs injectors, Fore hat with twin GT pumps and MDM Jr driver, JLT high boost and sct 2600 MAF.
The dyno day is a few weeks out. Then I am swapping out the t-56 for a built 4r75w so my wife can cruise it around.
It was built to be a fun droptop street car for cruising. We already have my turbo Cobra for blazing Hoosiers at 60mph plus on the highway. Lol
The dyno day is a few weeks out. Then I am swapping out the t-56 for a built 4r75w so my wife can cruise it around.
It was built to be a fun droptop street car for cruising. We already have my turbo Cobra for blazing Hoosiers at 60mph plus on the highway. Lol
ill play
I haven't seen many guys with built engines and a TVS. I picked up a 03 Cobra Engine for my 96 Cobra and was wondering what I should suspect with say a 9.25-9.5:1 CR worked heads, custom cams, MAC LTs, and a proper fuel system.
I am curious of this aswell, because I am currently building a motor for my tvs car. with 8.9cr and stage 3 cc. eventually.
My guess would be mid 700 with 21lbs and race gas
Talk to Malcolmv8 as he was running a gen 2 tvs with a high compression teksid 4.6l. He had ported heads and cams and made 800ish on e85 with some spark blow out.
He's torn it all apart and is going with better heads, and more compression with plans to keep the tvs.
He's torn it all apart and is going with better heads, and more compression with plans to keep the tvs.
Can't wait to test my VMP with the new SRA soon!! 
will be cool! in for resultsCan't wait to test my VMP with the new SRA soon!!
I bought one and it arrived yesterday; going into a different car than initially planned. Will be a bit before installed as the engine still needs built but it will be an 05 Aluminum Block, -5cc 3.56s Gibtecs, worked 03 Heads, Crower 62822 cams, Mac LTs, Gen 2 GT500 TB setup, 3.1" upper with 2lb lower.
Ill join. Just purchased one and awaiting arrival and install
I got one! Installing this weekend.
Sent from my [device_name] using the svtperformance.com mobile app
Sent from my [device_name] using the svtperformance.com mobile app
Stroked and bored 20 over, 10:1 compression, 80lb injectors, all arp hardware, new t56 magnum, South Bend stage 2 clutch, new custom 4” aluminum drive shaft with sonnic yoke and flange, Eaton tru trac w/ ford racing 4:10s, gt 500 fuel pumps. Goes on the rollers in June. Going for two tunes one with 2.9 pulley on 93 and the 2.6 on corn.
Currently building a teksid block for a project f100 or e100 with the eaton that was removed
Awesome! Congrats!
What kind of boost are u guys hoping to see with 3.1 upper and 2# lower? I just bought one and got the 2.9 upper with a 2# lower.
BTW I got a Rousch CAI kit sitting in my garage if anyone needs it for a TVS 2.3. Have no use for it if someone needs one LMK and ill ship it out. U pay shipping.
Users who are viewing this thread
