2015 Twin Turbo Mustang GT Convertible

chevpwr

Member
Established Member
Joined
Oct 23, 2011
Messages
434
Location
Oklahoma
I have a yellow 2015 twin turbo Mustang GT convertible that is fully loaded with the 401A interior package. The sticker price on the car was $48,690.
It has 5600 total miles on it with 1600 miles on the new Aluminator short block, built transmission and 600 miles on the upgraded turbos and converter.
It has a Turbosmart E-boost2 with 6 boost settings from 9.9-21.2psi tuned on E70 and E80.
It should make over 1000whp (I haven’t dynoed it with the new turbos) and has run 9.30 @150 in the quarter mile.
Below is a list of modifications:
Aluminator short block with upgraded valve springs, oil pump gears and MMR crank sprocket
Hellion twin turbo kit with 62mm turbos (hot side has been HPC coated)
Fore stage 4 triple pump fuel system with ID 1300 injectors
Built 6R80 with Circle D 3B converter
DSS aluminum drive shaft
DSS half shafts
Viking Crusader shocks
BMR rear cradle bushing lockout
BMR rear bearing kit
BMR vertical link
BMR rear toe rods
BMR front drag springs
BMR rear drag springs
3:55 gears
Magnaflow Street Series exhaust
MSD 2-step
Peterson catch can
CDC rear spoiler
Painted engine and coil covers (I have the stock unpainted ones also)
20x8.5/20x10 Foose Outcast street wheels with MT 305/35/20 DRs
17x4.5/17x9.5 Racestar drag wheels with MT 305/45/17 DRs
2 Rockford 8” P1 speakers with amp
I have a lot of stock parts to go with the car also.
The reason I am selling it is because I have reached all of my goals with this car like having a low 9 second daily driver that makes over 1000whp and drives like stock with heated/cooled seats and navigation. I am ready to check some more cars off of my bucket list.
I am asking $60,000 and I have way more than that in it.

QL3nOD.jpg


OLjqZQ.png


W8vmEJ.png


KLEhyB.jpg



Middle slip. Difference between it and the other two is the 60'
AjRP4r.png
 
Last edited:

oldstv

Well-Known Member
Established Member
Premium Member
Joined
May 28, 2008
Messages
2,263
Location
thomasville ga
This sounds like a deal!! If I were looking for a car this would be it. Good luck with your sale, it should go pretty fast.
 

chevpwr

Member
Established Member
Joined
Oct 23, 2011
Messages
434
Location
Oklahoma
I have compiled a list of parts/prices on the car. Everything was bought new and there ISN'T ANY LABOR included, just parts!

Dj5IHZ.png
 

chevpwr

Member
Established Member
Joined
Oct 23, 2011
Messages
434
Location
Oklahoma
Drove 150ish miles round trip to the dyno today.
I was using E70 out of the pump.

720/687 @ 10.1psi
758/731 @ 11.7psi
880/818 @ 14.7psi
931/867 @ 16.7psi
997/916 @ 19.7psi
1046/919 @ 21.8psi

0Aujms.png
 

olaosunt

Member
Established Member
Joined
Jan 20, 2012
Messages
590
Location
Carmel,Indiana
I may be looking to sell mine .

Very similar build ...DIB/fastback but instead of alluminator, sleeved MMR 1500 5.2 block /GT 350 heads.
 

Users who are viewing this thread



Top