Billet Crankshaft Sprocket Gear and Billet Oil Pump Gears for 2015 Mustang GT 5.0 >>

Modular Racing

Authorized Vendor
Authorized Vendor
Joined
Jun 28, 2004
Messages
15,176
Location
877 MOD POWR
MMR Hurricane Billet Oil Pump gears for all 2015-2017 5.0 GT and Boss
Aircraft grade US made Billet steel heat treated oil pump gears. Installs into factory pump with no modification. Dont take a chance with the factory gears, if your engine is modified this part may save you from a complete engine failure. Limitless RPM operation! So strong that they are guaranteed for LIFE to the original owner!!. A must for all forced induction applications. Tested by team MMR beyond 2000HP and 10,000 rpm!!!

Order here: http://www.modularmotorsportsracing...page=product_info&cPath=26_27&products_id=269

Direct fit into factory oil pump housing.

400224_.jpg


This gear replaces the factory powdered metal gear directly with no other changes, the MMR gears are manufactured from billet 9310 heat treated material and precision made in the US by MMR. This is the only gear proven to handle 2000+ HP and 10,000 RPM! As used by the current NMRA Coyote Modified and NMRA Renegade record holders along with the Worlds Fastest Coyote and First in ther 6's! If you are building aftermarket engine, have a Ford Racing Aluminator, or rebuilding a coyote engine you need one of these!!! Retail on the Billet steel gears is $219.

Order here: http://www.modularmotorsportsracing...page=product_info&cPath=28_29&products_id=580

Dont let this happen to you:

broken%20coyote%20gear.jpg


attachment.php


The new MMR Billet gear

coyote%20billet%20lower%20gear.jpg
 
Last edited:

BAD GT

Member
Established Member
Joined
Apr 25, 2012
Messages
197
Location
Michigan
Got both on order from you. Are there timing marks that can be lined up before removing the chain to change these? I havent seen much on this other then pictures.

thanks.
 

PIKE5.0

Member
Established Member
Joined
Feb 13, 2012
Messages
295
Location
Oklahoma City, OK
Just had the MMR Crank gear installed last weekend! Already had a TSS OPG that went in too. Don't forget to swap those Ford Focus chain tensioners too!
 

Modular Racing

Authorized Vendor
Authorized Vendor
Joined
Jun 28, 2004
Messages
15,176
Location
877 MOD POWR
Got both on order from you. Are there timing marks that can be lined up before removing the chain to change these? I havent seen much on this other then pictures.

thanks.

Yes, there are timing marks but they do not need to be aligned prior to removing the chains, just make sure they are when putting them back on.
 

Modular Racing

Authorized Vendor
Authorized Vendor
Joined
Jun 28, 2004
Messages
15,176
Location
877 MOD POWR
Installation Varies from shop to shop, we suggest you call Frank @ Voodoo, he is a MMR dealer and can give you a quote.
 

Laztug

Member
Established Member
Joined
Nov 5, 2011
Messages
353
Location
Slow Lane
What is the lead time OPG / CS?
I placed an order June 14, 2016 and I still don't have a tracking number.
 

Users who are viewing this thread



Top