FS:posi raceport,longtubes,spray and ect

brett15

Member
Established Member
Joined
Jan 16, 2013
Messages
155
Location
Lincoln,NE
Posi Race port upper-1000 shipped!
stock lower manifold
Stock intercooler(full eaton swap available! Minus intercooler res.)
JBA/Kooks longtubes and x pipe-
Jlt intake and 90mm tube with a ba2800(supports 750whp)-350
True Forged Intercooler Reservoir-SOLD!!!!
Wet Nitrous kit-Contact me

Parts are still on vehicle I will upload pictures as I can feel free to contact me at 402-202-4081 I can send pictures and answer questions that way. Thank you!
-Brett
 
Last edited:

brett15

Member
Established Member
Joined
Jan 16, 2013
Messages
155
Location
Lincoln,NE
I have more parts that I will sell as I won't need any of the eaton part's. I can make package deals on all the parts as a whole for a complete eaton swap and trade stuff for turbo part's or complete package. Thank you.
 

brett15

Member
Established Member
Joined
Jan 16, 2013
Messages
155
Location
Lincoln,NE
I would prefer to keep the jlt and maf together however. If you both have payment I will split them up.

Messaged and texted about the tf reservoir! Please pm me about the jlt and maf! Thank you!
-Brett
 

brett15

Member
Established Member
Joined
Jan 16, 2013
Messages
155
Location
Lincoln,NE
I have been sending pictures to everyone. I am going to try and upload them tonight. A lot of interest in parts. My number is in the add so all of you requesting pictures can send me a text for faster response! Otherwise if you left your number or a pm I believe I have tried to make contact with you to further discuss and send pictures! Happy holidays! Thanks for the understanding of no pictures on the board. I believe I have a few transaction via svtperformance with good feedback and on corral.net! -Brett
 

brett15

Member
Established Member
Joined
Jan 16, 2013
Messages
155
Location
Lincoln,NE
I started removing some of these parts today. I should have the blower and manifold off tomorrow. Intake,throttle body,and plenum off! The port #011.

The maf is a 90mm tube ba2800 just to let me people know. The headers are jba(kooks) longtubes I will need to verify the size before I post it. I plan on checking on that tomorrow when I work on the car a little bit more.

Everyone I believe I have responded too. A lot of interest in everything :) Pictures sent and texts replied. If I missed you PLEASE don't hesitate to contact me again! :) Thanks everyone!
-Brett
 

1Kona_Venom

US Army (Ret)
Established Member
Premium Member
Joined
Feb 19, 2010
Messages
4,938
Location
Savannah, Ga
I started removing some of these parts today. I should have the blower and manifold off tomorrow. Intake,throttle body,and plenum off! The port #011.

The maf is a 90mm tube ba2800 just to let me people know. The headers are jba(kooks) longtubes I will need to verify the size before I post it. I plan on checking on that tomorrow when I work on the car a little bit more.

Everyone I believe I have responded too. A lot of interest in everything :) Pictures sent and texts replied. If I missed you PLEASE don't hesitate to contact me again! :) Thanks everyone!
-Brett

Hey Brett....are these the same headers from a previous F/S thread back in November-----that you had posted? Just curious......

http://www.svtperformance.com/forum...ort-long-tubes-nitrous-xpipe-dumps&highlight= (SEE POST#12)
 

brett15

Member
Established Member
Joined
Jan 16, 2013
Messages
155
Location
Lincoln,NE
Hey Brett....are these the same headers from a previous F/S thread back in November-----that you had posted? Just curious......

http://www.svtperformance.com/forum...ort-long-tubes-nitrous-xpipe-dumps&highlight= (SEE POST#12)


I will need to double check but yes. I believe they are. Good find. I have been off the board for some time.(Ill get to your text/pm once I verify!)

The upper and lower is pulled off off the vehicle! I must had misunderstood the previous owner or he maid a mistake the manifold is not in fact ported. ONLY the upper!!!! I will make sure everyone understands this before it is sold by itself or as a pair!

Payment received for the intercooler res. Will be sent out at the end of the week! :)
 

brett15

Member
Established Member
Joined
Jan 16, 2013
Messages
155
Location
Lincoln,NE
IMG_0072.jpg
IMG_0083.jpg
IMG_0087.jpg
IMG_0091.jpg
IMG_0092.jpg
 

brett15

Member
Established Member
Joined
Jan 16, 2013
Messages
155
Location
Lincoln,NE
Please do not mind the engine bay! Previous owner didn't know how to make things look decent...! 1000 shipped to your door for the posi paypal fees I will pay for. Thank you!
 

Users who are viewing this thread



Top