Project "Snot Rocket"....CPR Turbo Build

[HONDASAKI]

Started my build last night. Hoping to be done this time next month. Waiting on a few odds and ends, and I'll be doing the install at night after work. Installing a CPR single turbo system. Forced Inductions BW S476 76/83
The build (for now) will be as follows:
CPR turbo
Stock motor
MMR oil pump gears
ATI balancer
Fore Return fuel system (twin pumps)...E85
ID1000's
Stock 6r80
2B converter (maybe trans brake if needed)
Hoping to make 700rwhp and join the 9 sec stock motor club!! (after getting it dialed in of coarse)

 

[Voltwings]

Wicked, looking forward to the results.

 

[HONDASAKI]

Got the car jacked up last night. Exhaust off, bumper off, and engine aprt to the cam chains. Going to install the oil pump gears tonight and get the engine sealed up. Will start on the K-member and hot side this weeked.

 

[CM5878]

I dig the matching color bike

 

[HONDASAKI]

I dig the matching color bike

Team Green all the way!!

 

[SID297]

That's a health sized turbo.

 

[Mr. Mach-ete]

Nice garage set up dude. That thing should rock!

 

[Nuar]

all you guys changing the oil pump gears... make it look so damn effortless.

I would be petrified to crack my brand new motor open lol.

You have a very fast booger in the making sir Loving the progress so far

 

[AntiHeightPunk]

where in florida are you at?

 

[Sick_Mustang]

Why is everyone in Florida going turbo?


I'm slacking big time?


Badass car!!

 

[SignalZero]

Game time!!! All these turbo cars make me all giddy! starting after me and I have a feeling you'll be done first!! :beer:

 

[notchy444]

Yes!!! more builds to drool over. Be careful boost is addicting! What psi are you shooting for?

 

[5.0GT]

That garage ...

How much did the wrap cost you. Clean work man

 

[HONDASAKI]

Nice garage set up dude. That thing should rock!

Thanks man!

all you guys changing the oil pump gears... make it look so damn effortless.

I would be petrified to crack my brand new motor open lol.

You have a very fast booger in the making sir Loving the progress so far

LOL, new motors are the easiest to work on, nice and clean!

where in florida are you at?

Port Saint Lucie

Why is everyone in Florida going turbo?


I'm slacking big time?


Badass car!!

Turbo is the only way to go! My friend tells me "belts are for pants!!"

Yes!!! more builds to drool over. Be careful boost is addicting! What psi are you shooting for?

Being careful will be the hardest part! I asked Dustin if he could disable the up arrow on the eboost!!
Hoping for 6# street tune and 8# race tune. But it really depends on the power levels.

That garage ...

How much did the wrap cost you. Clean work man

Thanks!
It was right around $150, used 100' of 2" and 100' of 1" on the headers

 

[HONDASAKI]

Got some work done last night. Finished the oil pump gears, and got the new balancer on. Dropping the K-member and installing the headers this weekend. More updates to follow. . .

 

[90goldtsiawd]

Sweet car/bike color combo. Post vids running them against each other when you're done!

 

[HONDASAKI]

Sweet car/bike color combo. Post vids running them against each other when you're done![/QUOTE

Thanks, that's a good idea. It'll be a good race for sure. The fastest the bikes been is 10.3@147 wheeling half way down the track. It wont stay down in 1st at all, I shift early and still floats 2nd. If the bike was set up it'd be faster in the 1/4. I had an 06
zx10 set up right for drag and it ran 8.99@157 stock motor just tweaked out. Nothing like 190hp in a 400lb bike!

 

[90goldtsiawd]

Sweet car/bike color combo. Post vids running them against each other when you're done![/QUOTE

Thanks, that's a good idea. It'll be a good race for sure. The fastest the bikes been is 10.3@147 wheeling half way down the track. It wont stay down in 1st at all, I shift early and still floats 2nd. If the bike was set up it'd be faster in the 1/4. I had an 06
zx10 set up right for drag and it ran 8.99@157 stock motor just tweaked out. Nothing like 190hp in a 400lb bike!

Holy shit!!! Sounds like you'll need to build the motor in the stang to make a race for the bike then!

 

[SignalZero]

Slow down dammit!! Your making me look lazy!! Come 2pm, car work and beer shall commence! Not necessarily in that order... looks awesome tho. Can't wait to hit the track with ya!! Boosted Florida Coyotes FTW!

 

[Dave_6]

Damn, I'm so jelly of all you guys buying these nice turbo kits! Looking good so far though, and loving all the green!