2014 TVS 2.3L Supercharger & Elbow

brandonflood123

Active Member
Established Member
Joined
Oct 3, 2013
Messages
1,069
Location
texas
danm you seem to get these in alot i hope you still are getting them in when im ready to do my 2010. either that or ill go with a 2.9
 

thebuffalo11

Member
Established Member
Joined
Nov 6, 2013
Messages
407
Location
CA
Can anyone tell me if you have to use the 13-14 elbow or can the stock 07-12 elbow be used?

Not sure, I believe not... But Are you asking if you can use your 07-09 elbow on a stock 13-14 TVS, or use your stock 07-09 elbow on a Ford Racing Black TVS?

Not sure if your elbow will fit either.. Im assuming no, because everyone I sell to wants the elbow..

But just an FYI, the Ford Racing Black units have a smaller inlet port compared to the 13/14 TVS. You will make less horse power on a FFRP black unit then a 13/14 unit like mine.. You will have to port the ffrp unit to make the same hp..

All my TVS's some with elbows already, why not just get one like mine that comes with the elbow, then there are no worries..?

Let me know if your interested,
Thanks!
 

Nasty500

Banned
Joined
Aug 21, 2013
Messages
214
Location
Florida
I was just curious. Just seems odd that they are always sold as a package deal. I know vmp sells a high flow elbow so if I was going with that I have no need for the stock elbow. If there is a difference. I'm doing my research now between a fr tvs, 13-14 tvs or the vmp tvs.
 

thebuffalo11

Member
Established Member
Joined
Nov 6, 2013
Messages
407
Location
CA
I was just curious. Just seems odd that they are always sold as a package deal. I know vmp sells a high flow elbow so if I was going with that I have no need for the stock elbow. If there is a difference. I'm doing my research now between a fr tvs, 13-14 tvs or the vmp tvs.

Ok cool. If you decide to get a high flow elbow, and do not need the one that comes with my kit, ill knock $150 off. I can sell the elbow by its self for $150-200.. So let me know if you are interested with or without the elbow..
Thanks
 

black2007shelby

pure venom
Established Member
Joined
Feb 22, 2013
Messages
675
Location
Southeast usa
Not sure, I believe not... But Are you asking if you can use your 07-09 elbow on a stock 13-14 TVS, or use your stock 07-09 elbow on a Ford Racing Black TVS?

Not sure if your elbow will fit either.. Im assuming no, because everyone I sell to wants the elbow..

But just an FYI, the Ford Racing Black units have a smaller inlet port compared to the 13/14 TVS. You will make less horse power on a FFRP black unit then a 13/14 unit like mine.. You will have to port the ffrp unit to make the same hp..

All my TVS's some with elbows already, why not just get one like mine that comes with the elbow, then there are no worries..?

Let me know if your interested,
Thanks!

How many rear wheel hp does these 13 tvs made if i put on mine 2007 gt500 with stock lower pulley? And is it a simple swap with the blower and elbow or something else have to be modified ?
 

thebuffalo11

Member
Established Member
Joined
Nov 6, 2013
Messages
407
Location
CA
How many rear wheel hp does these 13 tvs made if i put on mine 2007 gt500 with stock lower pulley? And is it a simple swap with the blower and elbow or something else have to be modified ?



If you use the TVS 2.3 with a larger TB, intake & tune, you will be right at 700rwhp..

Let me know if your interested in one.
Thanks
 

thebuffalo11

Member
Established Member
Joined
Nov 6, 2013
Messages
407
Location
CA
Let me re-phrase.. If you run the TVS with nothing else upgraded, you will be around 622rwhp. If you combine with supporting mods like a TB and intake you will be getting closer to 700rwhp..
 
Last edited:

black2007shelby

pure venom
Established Member
Joined
Feb 22, 2013
Messages
675
Location
Southeast usa
Let me re-phrase.. If you run the TVS with nothing else upgraded, you will be around 622rwhp. If you combine with supporting mods like a TB and intake you will be getting closer to 700rwhp..

Bone stock 2013 gt500 with 5.8 Liter engine made 600 rwhp . How can a bone stock 2007 5.4 Liter gt500 with TVS made 622 rwhp ?? :shrug::shrug: And iam talking both cars with same stock size pulley.
 
Last edited:

B747crew

KINGCBRA
Established Member
Joined
Oct 29, 2013
Messages
152
Location
Raleigh,NC
I need the following set up

I'm needing a TVS, high flow elbow ,and the matching 65 mm Ford racing T/B

I have a JLT C/A and tuner now making 545.8 on my 2007.I want 700 rwhp min what do you have to do that?
 
Last edited:

thebuffalo11

Member
Established Member
Joined
Nov 6, 2013
Messages
407
Location
CA
$1699 shipped!

Curent medical conditions has turned this into a must sell item..
I had to go to the E.R friday and I am still in the ICU.. I know ill have some nice medical bills.. So I need to sell.. this is a super low price guys! Shop around, you will see..

Please pm to buy. Also text 951 667 033five. I accept paypal? I ship next day, professionally packaged, fully insured with signature confirmation.
 

Users who are viewing this thread



Top