Diablosport Intune

[dirtyd88]

No because you are retaining the stock cats.

That's what I figured, but wanted to make sure.

 

[whatwhine]

Jpc,
Are there gains with a setup like:
Stock headers, stock cats, bolt on 3" x or h, stock over axles w/ resonators and 3" axle back?
I would think 2.75 to 3 back to 2.75 then ending with 3 wouldn't b smooth transitions for exhaust flow.....

Can u post any pics of your bolt on h u mentioned above?

Sorry it's off topic of the op.....

 

[Eric@jpc]

Jpc,
Are there gains with a setup like:
Stock headers, stock cats, bolt on 3" x or h, stock over axles w/ resonators and 3" axle back?
I would think 2.75 to 3 back to 2.75 then ending with 3 wouldn't b smooth transitions for exhaust flow.....

Can u post any pics of your bolt on h u mentioned above?

Sorry it's off topic of the op.....

JPC Racing 2011-2012 Mustang GT Stainless Steel Off Road X Pipe

 

[gs462]

Jpc,
Are there gains with a setup like:
Stock headers, stock cats, bolt on 3" x or h, stock over axles w/ resonators and 3" axle back?
I would think 2.75 to 3 back to 2.75 then ending with 3 wouldn't b smooth transitions for exhaust flow.....

Can u post any pics of your bolt on h u mentioned above?

Sorry it's off topic of the op.....

I read elsewhere that the over the axle pipes are worth about 7-10 RWHP,
those combined with the xpipe for stock cats I would think would have to give 10-15 rwhp total I talked to someone who opened up the resonators and he said they neck down to almost 2.25" inside that along with the kinks in the over the axle pipes has to be killing HP to some extent. So Aaron or Eric, what would the Xpipe and a set of over the Axle pipes cost me?? Also if a few of us decided to go with this setup could we get a discount?

Thanks,

 

[cobra199711]

Back in stock?

JPC Racing 2011-2012 Mustang GT Stainless Steel Off Road X Pipe

Thanks

 

[whatwhine]

I read elsewhere that the over the axle pipes are worth about 7-10 RWHP,
those combined with the xpipe for stock cats I would think would have to give 10-15 rwhp total I talked to someone who opened up the resonators and he said they neck down to almost 2.25" inside that along with the kinks in the over the axle pipes has to be killing HP to some extent. So Aaron or Eric, what would the Xpipe and a set of over the Axle pipes cost me?? Also if a few of us decided to go with this setup could we get a discount?

Thanks,

Link is there, search their store a bit.....

 

[Eric@jpc]

I read elsewhere that the over the axle pipes are worth about 7-10 RWHP,
those combined with the xpipe for stock cats I would think would have to give 10-15 rwhp total I talked to someone who opened up the resonators and he said they neck down to almost 2.25" inside that along with the kinks in the over the axle pipes has to be killing HP to some extent. So Aaron or Eric, what would the Xpipe and a set of over the Axle pipes cost me?? Also if a few of us decided to go with this setup could we get a discount?

Thanks,

With the forum discount your looking at 615 you have to call for that price

 

[cobra199711]

Do you have these back in stock???? ^^^^^^^^

 

[Eric@jpc]

Im working on it. We had some issues getting the 2.75 tubing

 

[cobra199711]

Ok, any ETA?

 

[Z25OH]

after cat X wont do squat beside smooth and quiet the exhaust down and smooth out top end.....


I guess ill ask again:

JPC: if a customer already has an SCT device, can they get a mail order JPC tune from you?

 

[Diablo Mike]

after cat X wont do squat beside smooth and quiet the exhaust down and smooth out top end.....


I guess ill ask again:

JPC: if a customer already has an SCT device, can they get a mail order JPC tune from you?

Are you asking if you can use an inTune to load a custom tune over the SCT device, or if they offer tunes for the SCT tool?

 

[whatwhine]

I think he's asking if Jpc does mail order tunes for SCT.
To which, Iirc, Jpc stated they tune SCT and diablo.....

 

[Z25OH]

I think he's asking if Jpc does mail order tunes for SCT.
To which, Iirc, Jpc stated they tune SCT and diablo.....

Yes exactly...

Some people do not want the iTune but would like a JPC tune

 

[Aaron@JPCRacing]

So if someone has an SCT device already they can get a custom JPC tune emailed to them? My buddy tried from you guys and they said no

Currently we're not doing email tunes for the SCT handhelds.

AAron, I have 13 GT and I want to buy your over the axle pipes to wake up the sound of the gt500s, My question Is, Is there an X or H pipe that will bolt to the stock cats and give me a few extra HP?

You can always go with ours.

Yes exactly...

Some people do not want the iTune but would like a JPC tune

If you already own an SCT and would like a tune we can always do a custom dyno tune. As of right now we aren't doing email tuning with the SCT.

 

[Heavyfoot]

Is your reason for not doing the email tunes because of all the trouble have been having with the sct tuners lately?

 

[Aaron@JPCRacing]

Is your reason for not doing the email tunes because of all the trouble have been having with the sct tuners lately?

No, it's just that we want to focus on one product for our customers and make it as good as we can make it.

 

[whatwhine]

Jpc, dirty
Any updates? Anymore guys testing this out?

 

[dirtyd88]

I haven't messed with anything lately. Been busy with other things. Hoping to get to the track this weekend. Depending on the health of the girlfriend with her blood clot.

 

[whatwhine]

^ sorry to hear. Hope all is well.

Jpc, any news on the intune??