T-45 bolts?

SVT CAMR

Active Member
Established Member
Joined
Mar 12, 2009
Messages
1,447
Location
Chi-Town Burbs
How many bolts are used to bolt the T-45 up to the block?

Any Pics or measurements of the bolts available?

I have what I think are the correct bolts but not sure they are all there.
 

98 N/A 4V

Active Member
Established Member
Joined
Sep 14, 2004
Messages
2,494
Location
Tampa, FL
They are all the same size except for 2 on the sides. There are ears on the block about at the 9 and 3 o'clock position. Maybe 1/2" longer than the other 5. Oh and also need the flex plate bolts (2).
 

SVT CAMR

Active Member
Established Member
Joined
Mar 12, 2009
Messages
1,447
Location
Chi-Town Burbs
Thanks for the reply. I have 6 bolts so I'm atleast 1 short. My longer bolts are just a tad longer than the shorter ones. I will post up a pic. and maybe we could take it from there. I just want to be ready when the time comes. I sold my TKO and I'm putting a t-45 back in. For what ever reason I cannot find the bolts I saved. Someone just sent me what they thought were the bolts I needed. Thanks for your help. anybody else have any sizes or pics of them for me?
 

SVT CAMR

Active Member
Established Member
Joined
Mar 12, 2009
Messages
1,447
Location
Chi-Town Burbs
They are all the same size except for 2 on the sides. There are ears on the block about at the 9 and 3 o'clock position. Maybe 1/2" longer than the other 5. Oh and also need the flex plate bolts (2).


Does that make 9 total then?

Looks like the bolts I have are good then. I have the 2 bolts for 9 and 3 oclock and 4 out of the 5 half inch shorter ones. Then your saying there are 2 more for the spacer? Is that correct?
 
Last edited:

SVT CAMR

Active Member
Established Member
Joined
Mar 12, 2009
Messages
1,447
Location
Chi-Town Burbs
Thanks a lot Mark! The Guy that did that write up did a GREAT JOB! Thank you.

I do have those lower bolts to hold the spacer. Looks like I'm short 1 bolt.
trans003.jpg
 

Users who are viewing this thread



Top