So my 03 cobra started to creak when turning (my 04 did the same thing).
So i ran a search and came across this thread under the how 2 section.
Creaking/Squeaking steering wheel when turning fix
TSB that identifies and fixes this problem: # TSB 05-14-3
So i ran out and picked up the updated sleeves E5DZ-3K620-A...
It looks like the updated sleeves should be shorter according to the comparison pic in the how 2 thread.
When i took the old ones out they were the same length. (here's a pic)
So since i removed the old sleeve i just figured i'd replace it with the new ones i got. My question is, did i have the updated sleeves already?
The creaking went away but i'm thinking it'll probably come back if i already had the updated sleeves.
I also came across this page where they talk about cutting the sleeves.
http://paladinmicro.com/MustangSteeringRackFix.htm
Eventually i'm going to slap on the MM steering bushings...
So i ran a search and came across this thread under the how 2 section.
Creaking/Squeaking steering wheel when turning fix
TSB that identifies and fixes this problem: # TSB 05-14-3
So i ran out and picked up the updated sleeves E5DZ-3K620-A...
It looks like the updated sleeves should be shorter according to the comparison pic in the how 2 thread.
When i took the old ones out they were the same length. (here's a pic)
So since i removed the old sleeve i just figured i'd replace it with the new ones i got. My question is, did i have the updated sleeves already?
The creaking went away but i'm thinking it'll probably come back if i already had the updated sleeves.
I also came across this page where they talk about cutting the sleeves.
http://paladinmicro.com/MustangSteeringRackFix.htm
Eventually i'm going to slap on the MM steering bushings...